HP Procurve 2524 - Tacacs; TACACS Commands - EXEC Level; TACACS Commands - Configuration Level; Cdp

2.5 TACACS
2.5.1 TACACS commands - EXEC level
show tacacs
Displays TACACS configuration.
2.5.2 TACACS commands - Configuration level
[no] tacacs-server host <ip-addr> [key <key-string>]
Configures a TACACS server.
tacacs-server timeout <1-255>
Sets up the TACACS timeout interval in seconds.
2.6 CDP
2.6.1 CDP commands - EXEC level
show cdp [neighbor [port-num] [detail]]
Displays CDP configuration and neigbors discovered.
2.6.2 CDP commands - Configuration level
[no] cdp
Enables/disables CDP on the switch.
cdp timer <5-254>
Sets the CDP transimit interval in seconds.
cdp holdtime <10-255>
Sets the CDP holdtime in seconds.
cdp enable [ethernet] <port-list>
Enables/disables CDP on a particular port.
17