EasyManuals Logo

HP ProDesk 400 G2 User Manual

HP ProDesk 400 G2
160 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #139 background imageLoading...
Page #139 background image
3. Remove the access panel.
CAUTION: Pushing the CMOS button will reset CMOS values to factory defaults. It is important to back
up the computer CMOS settings before resetting them in case they are needed later. Back up is easily
done through Computer Setup. See
Computer Setup (F10) Utility on page 73 for information on backing
up the CMOS settings.
4. Locate, press, and hold the CMOS button in for five seconds.
NOTE: Make sure you have disconnected the AC power cord from the wall outlet. The CMOS button will
not clear CMOS if the power cord is connected.
NOTE: For assistance locating the CMOS button and other system board components, see the system
board components image at
System board on page 66.
5. Replace the access panel.
6. Reconnect the external devices.
7. Plug in the computer and turn on power.
NOTE: You will receive POST error messages after clearing CMOS and rebooting advising you that
configuration changes have occurred. Use Computer Setup to reset any special system setups along
with the date and time.
For instructions on Computer Setup, see Computer Setup (F10) Utility on page 73.
Clearing and resetting the CMOS 129

Table of Contents

Other manuals for HP ProDesk 400 G2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP ProDesk 400 G2 and is the answer not in the manual?

HP ProDesk 400 G2 Specifications

General IconGeneral
Tcase72 °C
Bus typeDMI2
SteppingC0
Processor cache2 MB
Processor cores2
Processor modelG1840
System bus rate5 GT/s
Processor familyIntel® Celeron® G
Processor seriesIntel Celeron Processor G1000 Series for Desktop
Processor socketLGA 1150 (Socket H3)
Processor codenameHaswell
Processor frequency2.8 GHz
Processor cache typeL2
Processor lithography22 nm
Processor manufacturerIntel
Processor front side bus- MHz
PCI Express slots version3.0
Processor operating modes32-bit, 64-bit
ECC supported by processorYes
PCI Express configurations1x16, 2x8, 1x8+2x4
Thermal Design Power (TDP)54, 53 W
Number of processors installed1
Maximum number of PCI Express lanes16
Memory types supported by processorDDR3-SDRAM
Memory clock speeds supported by processor1333 MHz
Memory bandwidth supported by processor (max)21.3 GB/s
Maximum internal memory supported by processor32 GB
Memory slots2x DIMM
Internal memory4 GB
Memory channelsDual-channel
Memory clock speed1600 MHz
Internal memory typeDDR3L-SDRAM
Memory layout (slots x size)1 x 4 GB
Storage mediaHDD
Optical drive typeDVD Super Multi
Card reader integratedNo
Total storage capacity500 GB
Discrete graphics card modelNot available
On-board graphics card modelIntel® HD Graphics
Maximum on-board graphics card memory1.024 GB
On-board graphics card OpenGL version4.3
On-board graphics card base frequency350 MHz
On-board graphics card DirectX version11.1
On-board graphics card dynamic frequency (max)1050 MHz
Number of displays supported (on-board graphics)3
Ethernet LAN data rates10, 100, 1000 Mbit/s
USB 2.0 ports quantity6
USB 3.2 Gen 1 (3.1 Gen 1) Type-C ports quantity0
Power supply180 W
Product typePC
Market positioningBusiness
Chassis typeDesktop
Product colorBlack
Country of originChina
Placement supportedHorizontal
Sustainability certificatesENERGY STAR
Operating system installedWindows 7 Professional
Operating system architecture64-bit
Scalability1S
Processor codeSR1VK
Processor ARK ID80800
Processor package size37.5 x 37.5 mm
Supported instruction setsSSE4.1, SSE4.2
Thermal solution specificationPCG 2013C
Intel Secure Key Technology version1.00
Intel Stable Image Platform Program (SIPP) version0.00
Intel segment taggingEnterprise, Small Business
Weight and Dimensions IconWeight and Dimensions
Depth358.8 mm
Width165 mm
Height355 mm
Weight6500 g

Related product manuals