Removal and replacement procedures 68
7.
Remove the Systems Insight Display.
To replace the component, reverse the removal procedure.
Front left bezel
To remove the component:
1. Power down the server (on page 26).
2. Extend or remove the server from the rack ("Remove the server from the rack" on page 27, "Extend the
server from the rack" on page 27).
3. Remove the access panel ("Access panel" on page 33).
4. Remove the PCI riser cage ("PCI riser cage" on page 43).
5. Remove the air baffle ("Air baffle" on page 53).
6. Extend or remove the Systems Insight Display ("Systems Insight Display" on page 67).
7. Disconnect the System Insight Display cable from the system board.
To Next Page
Loading...
