Drive box 3 or 6
• NVMe drives cabled to the primary riser cage
• SAS/SATA drives cabled to the primary riser cage
Two-bay SFF (Premium) drive cage
CAUTION: To avoid damage to the cables and server components, always route cables flat against the server walls, and
separate the cables as they enter the primary riser cage. Bundled cables can be pinched or damaged when installing the
fan cage or primary riser cage.
The following images define supported cable routing pathways between the two-bay SFF (premium) drive cage backplane and
the riser cages. For more information on the supported configurations, see one of the following:
• Cable matrix
•
NVMe drive cable matrix
Cabling
155
To Next Page
Loading...
