48-drive configuration
• Cables from the lower drive box backplanes are routed as shown in the 24-drive configuration.
• Cables from the upper drive box backplanes (boxes 1–3) are routed to the controller installed in the butterfly riser cage.
HPE Smart Storage Battery cabling
Cable
Description
Processor mezzanine tray energy pack cable
1
Blue
System board energy pack cable
2
Orange
1
This energy pack provides backup power to the NVDIMMs on processors 3 and 4.
2
This energy pack provides backup power to the NVDIMMs (processors 1 and 2) and the controllers installed on the system board.
Cabling 159
To Next Page
Loading...
