a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
3. Do one of the following:
• Extend the server from the rack (Extending the server from the rack).
• Remove the server from the rack (Removing the server from the rack).
4. Remove the access panel (Removing the access panel).
CAUTION: Do not operate the server for long periods with the access panel open or removed. Operating the server
in this manner results in improper airflow and improper cooling that can lead to thermal damage.
5. Remove the fan cage (Removing and replacing the fan cage).
6. Remove the fan cage holders.
To replace the component, reverse the removal procedure.
Removing and replacing the hot-plug fan
Procedure
1. Extend the server from the rack (
Extending the server from the rack).
2. Remove the access panel (Removing the access panel).
CAUTION: Do not operate the server for long periods with the access panel open or removed. Operating the server
in this manner results in improper airflow and improper cooling that can lead to thermal damage.
3. Remove the fan.
54
Removal and replacement procedures
To Next Page
Loading...
