14 HP ProLiant DL580 Generation 3 Server Maintenance and Service Guide
Required tools
You need the following items for some procedures:
• Torx T-15 screwdriver (provided with the server ("Rear panel components"
on page 98
))
• Phillips screwdriver
• Flat-head screwdriver
• Diagnostics Utility
Safety considerations
Before performing service procedures, review all the safety information.
Preventing electrostatic discharge
To prevent damaging the system, be aware of the precautions you need to follow
when setting up the system or handling parts. A discharge of static electricity
from a finger or other conductor may damage system boards or other static-
sensitive devices. This type of damage may reduce the life expectancy of the
device.
To prevent electrostatic damage:
• Avoid hand contact by transporting and storing products in static-safe
containers.
• Keep electrostatic-sensitive parts in their containers until they arrive at static-
free workstations.
• Place parts on a grounded surface before removing them from their
containers.
• Avoid touching pins, leads, or circuitry.
To Next Page
Loading...
