EasyManua.ls Logo

HP ProLiant ML30 Gen10 Plus - Expansion Card Options

HP ProLiant ML30 Gen10 Plus
166 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1 Fan connector 2 (system fan)
2 System maintenance switch
3 Flexible Slot power supply sideband connector
4 4-pin power supply connector
5 Fan connector 3 (heatsink fan)
6 24-pin power supply connector
7 Internal USB 3.2 Gen1 port
8 Front I/O connector
9 Fan connector 1 (PCI fan)
10 Drive backplane sideband connector
11 SATA port 5
12 SATA port 6
13 SATA port 1
14 SATA port 2
15 SATA port 3
16 SATA port 4
17 Front USB connector
18 Storage controller backup power connectors
19 Energy pack connector
20 HPE Trusted Platform Module 2.0 Gen10 (embedded TPM)
21 Slot 4 PCIe3 x8 (4, 1)
22 Slot 3 PCIe3 x16 (4, 1)
23 System battery
24 Slot 2 PCIe3 x8 (4, 1)
25 Slot 1 PCIe4 x16 (16, 8, 4, 1)
26 M.2 slot
ItemItem DescriptionDescription
All SATA ports support 6Gb/s transfer rate. The ports 5–6 are for the media bays.
The optical drive option is only supported in SATA port 5.
All SATA ports support 6Gb/s transfer rate. The ports 1–4 are for drive bays.
The M.2 slot supports either a SATA or NVMe SSD, or the iLO-M.2-serial module option.
System maintenance switch descriptionsSystem maintenance switch descriptions
PositionPosition DefaultDefault FunctionFunction
S1 Off
Off = iLO 5 security is enabled.
On = iLO 5 security is disabled.
S2 Off Reserved
S3 Off Reserved
S4 Off Reserved
1
,
2
1
3
3
3
3
4
1
2
3
4
1
HPE ProLiant ML30 Gen10 Plus Server Maintenance and Service Guide 131

Table of Contents

Other manuals for HP ProLiant ML30 Gen10 Plus

Related product manuals