To replace the component, reverse the removal procedure.
Removing and replacing the power supply blankRemoving and replacing the power supply blank
WARNING: WARNING: To reduce the risk of personal injury from hot surfaces, allow the power supply or power supply blank to
cool before touching it.
CAUTION: CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless all bays are populated
with either a component or a blank.
ProcedureProcedure
1. Remove the power supply blank from the bay.
2. Immediately install the replacement power supply blank spare.
Removing and replacing drive blanksRemoving and replacing drive blanks
CAUTION: CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless all bays are populated
with either a component or a blank.
ProcedureProcedure
To Next Page
Loading...
