To replace the component, reverse the removal procedure.
Fan replacementFan replacement
Removing and replacing the system fan
Removing and replacing the PCI fan
Removing and replacing the PCI fanRemoving and replacing the PCI fan
PrerequisitesPrerequisites
Before you perform this procedure, make sure that you have a T-15 Torx screwdriver available.
ProcedureProcedure
1. Power down the server.
2. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
3. Disconnect all peripheral cables from the server.
4. Do one of the following:
If the server is in tower mode, place the server on a flat, level surface with the access panel facing up.
To Next Page
Loading...
