HP ProLiant ML30 Gen10 Plus Maintenance And Service Guide

WARNING:WARNING:
To reduce the risk of injury from electric shock, remove all power cords to completely disconnect power from the
system.
This symbol indicates that the component exceeds the recommended weight for one individual to handle safely.
WARNING:WARNING:
To reduce the risk of personal injury or damage to the equipment, observe local occupational health and safety
requirements and guidelines for manual material handling.
A discharge of static electricity from a finger or other conductor may damage system boards or other static-sensitive devices. To
prevent damage, observe antistatic precautions.
This symbol indicates the presence of a laser device in the product that may exceed Class 1 limits. Refer to the product
documentation for more information.
This symbol indicates the presence of moving parts inside the product that may present a pinch point if improperly contacted.
WARNING:WARNING:
Hazardous moving parts. Do not insert any tools or any part of your body into the product while it is operating or
in any openings.
Rack warnings and cautionsRack warnings and cautions
WARNING:WARNING:
When all components are removed, the server weighs 10.40 kg (22.93 lb). When all components are installed, the server
HPE ProLiant ML30 Gen10 Plus Server Maintenance and Service Guide 30

HP ProLiant ML30 Gen10 Plus Specifications

General

Processor Sockets	1
Memory	Up to 128 GB DDR4 ECC UDIMM
Memory Slots	4
Form Factor	Tower
Processor	Intel Xeon E-2300 series
Storage	Up to 4 LFF or 8 SFF drives
RAID Support	HPE Smart Array S100i, S100i SR Gen10 SW RAID
Network	1 x 1GbE
Power Supply	350W
Chipset	Intel C252
Storage Controller	HPE Smart Array S100i, S100i SR Gen10 SW RAID
Maximum Internal Storage	Up to 64 TB
Operating System Support	Windows Server, Red Hat Enterprise Linux, SUSE Linux Enterprise Server, VMware ESXi
Weight	Approx. 10.5 kg