HP ProLiant ML30 Gen10 Plus - DIMM Slot Location; DIMM Label Identification

S5 Off
Off = Power-on password is enabled.
On = Power-on password is disabled.
S6 Off
Off = No function
On = Restore default manufacturing settings
S7 Off Reserved
S8 — Reserved
S9 — Reserved
S10 — Reserved
S11 — Reserved
S12 — Reserved
PositionPosition DefaultDefault FunctionFunction
To access the redundant ROM, set S1, S5, and S6 to On.
When the system maintenance switch position 6 is set to the On position, the system is prepared to restore all configuration settings
to their manufacturing defaults.
When the system maintenance switch position 6 is set to the On position and Secure Boot is enabled, some configurations cannot be
restored. For more information, see Configuring security.
DIMM slot locationDIMM slot location
The arrow points to the front of the server.
DIMM label identificationDIMM label identification
To determine DIMM characteristics, see the label attached to the DIMM. The information in this section helps you to use the label to
locate specific information about the DIMM.
For more information about product features, specifications, options, configurations, and compatibility, see the HPE DDR4
SmartMemory QuickSpecs on the Hewlett Packard Enterprise website (https://www.hpe.com/support/DDR4SmartMemoryQShttps://www.hpe.com/support/DDR4SmartMemoryQS).
1
1
,
2
,
3
1
2
3
HPE ProLiant ML30 Gen10 Plus Server Maintenance and Service Guide 132