HP ProLiant ML30 Gen10 Plus - Installing the Processor

Installing the processorInstalling the processor
PrerequisitesPrerequisites
Review the processor cautions .
Before you perform this procedure, make sure that you have the following items available:
T-15 Torx screwdriver or a torque screwdriver with T-15 drill bit
1.0 gm (0.5 ml) or two 0.5 gm (0.25 ml) of thermal grease
ProcedureProcedure
1. Do not touch the socket contacts or the bottom of the processor.
HPE ProLiant ML30 Gen10 Plus Server Maintenance and Service Guide 80