HP ProLiant ML30 Gen10 Plus - Removing and Replacing a SAS LTO Tape Drive

1. Remove the front bezel.
2. Remove the drive blank.
Retain the blank for future use.
LFF drive blank
SFF drive blank
To replace the component, reverse the removal procedure.
Media device replacementMedia device replacement
Removing and replacing a SAS LTO tape drive
Removing and replacing a USB RDX docking station
Removing and replacing an optical drive
Removing and replacing a SAS LTO tape driveRemoving and replacing a SAS LTO tape drive
HPE ProLiant ML30 Gen10 Plus Server Maintenance and Service Guide 56