7. Identify the expansion slot compatible with the storage controller .
8. Remove the PCI blank retainer.
9. Remove the blank opposite the selected expansion slot.
Retain the blank for future use.
10. Install the storage controller.
Make sure that the controller is seated firmly in the slot.
11. To enable the HPE SR SmartCache feature, install an energy pack.
SmartCache and CacheCade enable solid-state drives to be used as caching devices for hard drive media. These features accelerate
access to frequently used data by caching hot data from the hard drives onto the solid-state drives.
12. Install the PCI blank retainer .
13. Cable the controller .
14. Install the air baffle .
15. Install the access panel .
To Next Page
Loading...
