Install the server into the rack .
19. Connect all peripheral cables to the server.
20. Connect each power cord to the server.
21. Connect each power cord to the power source.
22. Power up the server .
Deploying an operating systemDeploying an operating system
23. Deploy a supported operating system to the boot device drive.
For more information, see the product QuickSpecs ( https://www.hpe.com/info/qshttps://www.hpe.com/info/qs).
After the OS installation completes, the system automatically copies the operating system to the second, mirrored drive on the boot
device.
24. Proceed with normal system setup and operation.
To Next Page
Loading...
