Operations 25
Install the rack bezel
1. Align the four hooks on the rack bezel with the keyholes on the metal frame, and install the rack
bezel.
2. Tighten both internal rack bezel thumbscrews.
Remove the access panel
WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and
the internal system components to cool before touching them.
CAUTION: Do not operate the server for long periods with the access panel open or removed. Operating
the server in this manner results in improper airflow and improper cooling that can lead to thermal damage.
1. Extend the server from the rack, if applicable ("Extend the server from the rack" on page 22).
2. Open the locking latch, slide the access panel to the rear of the chassis, and remove the access
panel.
To Next Page
Loading...
