HP ProLiant ML370 G5 - Array Controllers and Battery-Backed Write Cache Options; Parallel and Second Serial Connector Option

Hardware options installation 63
5.
Release the retainer clip.
6. Press the slot release lever and swing the slot release lever upward.
7. Lift the expansion board out of the server.
CAUTION: Make a note of board locations. Be sure to install replacements in the same slots.
Array controllers and Battery-Backed Write Cache options
For a list of supported options, refer to the Documentation CD or the QuickSpecs on the HP website
(http://www.hp.com/servers/proliantml370
).
Parallel and second serial connector option
To install the component:
1. Power down the server (on page 20).