Hardware options installation 59
5.
Use the power cord management clip to secure the cord and form a service loop.
6. Connect the power cord to the power source.
7. Be sure that the power supply LED is green ("Rear panel LEDs" on page 12).
8. Be sure that the front panel external health LED is green ("Front panel LEDs and buttons" on page 9).
IMPORTANT: For maximum server availability, be sure that the two power supplies are powered by
separate AC power sources.
Expansion board options
The server supports PCI-X and PCI Express expansion boards.
Slot
Expansion
card type
Connector Speed
1 PCI Express x8 x4
2 PCI-X 64-bit, 3.3-V 133-MHz capable
3 PCI-X 64-bit, 3.3-V 133-MHz capable
4 PCI Express x8 x4
5 PCI Express x8
x4 (optional x8 when
PCIe Bus Expander is
installed in slot 4)
6 PCI Express x8 x4
7 PCI Express x8
x4 (optional x8 when
PCIe Bus Expander is
installed in slot 6)
8 PCI Express x8 x4
9 PCI Express x8
x4 (optional x8 when
PCIe Bus Expander is
installed in slot 8)
To Next Page
Loading...
