HP RP7 Model 7800 - Drive Cables and Bracket Assembly

Drive Cables and Bracket Assembly
Description Spare part number
Drive cables and bracket assembly 702776-001
1. Prepare the computer for disassembly (Preparation for Disassembly on page 46).
2. Remove the rear I/O panel (
Rear I/O Panel on page 49).
3. Remove the mounting bracket cover (
Mounting Bracket Cover on page 53).
4. Remove the display head back panel (
Display Head Back Panel on page 54).
5. Remove the display head from the stand (
Removing the Display Head from the Stand
on page 90).
6. Remove the rear metal plate (
Rear Metal Plate (EMI shield) on page 91).
7. Remove the drive data cables from the clips on the cage (1).
8. Remove the antenna cables from the clip on the cage (2).
9. Remove the Torx screw (3) that secures the cage to the computer.
Figure 8-7 Removing the screw and the cables from the clips
Drive Cables and Bracket Assembly 101