12. Replace the rear I/O cover by placing the hooks on the bottom of the cover into the slots on the
bottom of the chassis (1). Then rotate the top of the I/O cover up so that it snaps securely onto
the chassis (2).
13. Reconnect the power cord and press the power button.
VFD Customer Display With One or Two Poles
1. Prepare the computer for disassembly (Preparation for Disassembly on page 46).
2. Remove the rear I/O panel (
Rear I/O Panel on page 49).
3. Remove the power supply cover (
Power Supply Cover on page 47).
4. Remove the decorative panel (
Decorative Panel (IMD) on page 48).
76 Chapter 8 Removal and Replacement Procedures
To Next Page
Loading...
