Optional Integrated USB Modules
There are three optional integrated USB modules available from HP (sold separately).
1 retail integrated webcam for live video functions 695661-001
2 retail integrated fingerprint reader to add security identification functions 690684-001
3 retail integrated dual-head magnetic stripe reader for card data read 690685-001
The integrated USB modules can be installed on the top or bottom of the display head or on either
side of the display head.
NOTE: If you are installing a webcam, do not install it on the sides of the display head. The webcam
must be installed on top of the display head for proper video orientation.
NOTE: These USB ports only support the USB modules listed above. They do not support optical
drives or hard drives.
The procedure for installing an integrated USB module is the same for all modules. To install a USB
module:
1. Prepare the computer for disassembly (
Preparation for Disassembly on page 46).
2. Remove the rear I/O panel (
Rear I/O Panel on page 49).
3. Remove the display head back panel (
Display Head Back Panel on page 54).
Optional Integrated USB Modules 63
To Next Page
Loading...
