WLAN Module
Description Spare part number
WLAN module, 802.11a/b/g/n 652165-001
1. Prepare the computer for disassembly (Preparation for Disassembly on page 46).
2. Remove the rear I/O panel (
Rear I/O Panel on page 49).
3. Remove the mounting bracket cover (
Mounting Bracket Cover on page 53).
4. Remove the display head back panel (
Display Head Back Panel on page 54).
5. Remove the display head from the stand (
Removing the Display Head from the Stand
on page 90).
6. Remove the rear metal plate (
Rear Metal Plate (EMI shield) on page 91).
7. Remove the antenna cables from the connectors on the WLAN module (1).
8. Remove the Phillips screw (2) that secures the module to the system board.
9. Rotate the top of the module upward (3), and then pull it away from the slot.
Figure 8-15 Removing the WLAN module
To install the WLAN module, reverse the removal procedure.
WLAN Module 109
To Next Page
Loading...
