Hard Drive
Description Spare part number
320 GB, 7200 rpm SATA hard drive 639135-001
256 GB Solid State Drive (SSD) 661842-001
128 GB Solid State Drive (SSD) 665961-001
32 GB MLC Flash, 2.5-in 686616-001
Grommet, hard drive 594220-001
CAUTION: If you are replacing a hard drive, be sure to back up the data from the old drive so that
you can transfer the data to the new drive.
1. Prepare the computer for disassembly (Preparation for Disassembly on page 46).
2. Remove the rear I/O panel (
Rear I/O Panel on page 49).
3. Remove the display head back panel (
Display Head Back Panel on page 54).
4. Open the hard drive door (1), then grasp the pull tab on the side of the hard drive and pull the
hard drive out of the drive bay (2).
86 Chapter 8 Removal and Replacement Procedures
To Next Page
Loading...
