HP RP7 Model 7800 - Hard Drive LED Cable

9. Lift the hood sensor and cable from the computer (3).
Figure 8-11 Removing the hood sensor
To reinstall the front USB and power switch, reverse the removal procedure.
Hard Drive LED Cable
Description Spare part number
Hard drive LED cable 702777-001
1. Prepare the computer for disassembly (Preparation for Disassembly on page 46).
2. Remove the rear I/O panel (
Rear I/O Panel on page 49).
3. Remove the mounting bracket cover (
Mounting Bracket Cover on page 53).
4. Remove the display head back panel (
Display Head Back Panel on page 54).
5. Remove the display head from the stand (
Removing the Display Head from the Stand
on page 90).
6. Remove the rear metal plate (
Rear Metal Plate (EMI shield) on page 91).
Hard Drive LED Cable 105