HP StorageWorks MSA1000 Software Guide

HP StorageWorks 1000/1500 Modular Smart Array Command Line Interface user guide 13
Overview of CLI storage configuration procedures
When using the CLI to initially configure the MSA controller and its storage, use the following sequence:
1. Create the LUNs.
See ”LUN-related commands” on page 25 for command descriptions.
NOTE: OpenVMS environments must assign a unique ID number to each LUN. See ”Assigning a
name or ID to a LUN” on page 28 for instructions.
2. Enter array controller settings, including global parameters.
See ”Global commands” on page 35 for command descriptions.
NOTE: OpenVMS environments must assign a unique ID number to each array controller. See
”Setting the controller ID” on page 36 for instructions.
3. Enter connection information about the HBAs with access to the MSA.
See ”Host connection commands” on page 40 for command descriptions.
NOTE: Each host accessing the storage must identify its operating system (profile type.) See
”Changing the profile of a connection” on page 41 for instructions.
4. (Optional) Limit access to the storage.
See ”Access Control List commands” on page 43 for command descriptions.

HP StorageWorks MSA1000 Specifications

General

RAID levels	0, 1, 0+1, 5
Certification	Microsoft Cluster Server Certification\\r Hewlett Packard Data Protector\\r VERITAS Backup Exec and NetBackup\\r Legato NetWorker for Windows\\r Computer Associates BrightStor Enterprise Backup
Internal memory	256 MB
Memory clock speed	- MHz
Internal memory type	-
Operating temperature (T-T)	10 - 35 °C
Operating relative humidity (H-H)	10 - 90 %
Supported storage drive interfaces	SCSI
Windows operating systems supported	Yes
Harmonized System (HS) code	84733080

Weight and Dimensions

Depth	52.1 mm
Width	48.3 mm
Height	17.5 mm
Weight	31210 g