HP StorageWorks MSA1000 Software Guide

18 Using the CLI
Example help display_all command and response
CLI> help display_all
Displaying list of all currently supported CLI commands:
? help
add unit add units
add connection add acl
add profile copy profile
change mode add spare
download firmware delete unit
delete units delete connection
delete acl delete profile
delete spare migrate unit
expand unit extend unit
accept unit accept units
rename connection set unit_id
set this_controller set this_controller_id
set other_controller set other_controller_id
set globals set acl
set connection set prompt
set unit locate disk
locate unit locate bus
locate box locate all
locate cancel show connections
show unit show units
show unit_id show this_controller
show other_controller show version
show disks show version -all
show acl show globals
show tech_support show profile
disable other_controller disable standby
Show preferred_path disable this_controller
show auto_path_change set preferred_path
show proxystats set auto_path_change
set this_controller_hard_address show this_controller_hard_address
start perf show perf
clear perf stop perf
show taskstats show cacheinfo
show eventlog set debug
show aculock override aculock

HP StorageWorks MSA1000 Specifications

General

RAID levels	0, 1, 0+1, 5
Certification	Microsoft Cluster Server Certification\\r Hewlett Packard Data Protector\\r VERITAS Backup Exec and NetBackup\\r Legato NetWorker for Windows\\r Computer Associates BrightStor Enterprise Backup
Internal memory	256 MB
Memory clock speed	- MHz
Internal memory type	-
Operating temperature (T-T)	10 - 35 °C
Operating relative humidity (H-H)	10 - 90 %
Supported storage drive interfaces	SCSI
Windows operating systems supported	Yes
Harmonized System (HS) code	84733080

Weight and Dimensions

Depth	52.1 mm
Width	48.3 mm
Height	17.5 mm
Weight	31210 g