• Gateway IP address
• Domain name, such as mycompany.com
6. The preceding information is sufficient to configure the network and once entered, the wizard
will display and ask you to confirm the specified settings. At this point, do you wish to configure
another subnet? For example, you may wish to dedicate one network to StoreOnce Catalyst
Copy and replication. Or, you may wish to use the 10GbE network for backup data.
You will be prompted to provide details of the new subnet, as above.
7. When you have completed details for all subnets, you are asked to select which subnet will
provide the default gateway. The wizard then validates and activates the configuration and
it becomes the current configuration.
46 Network configuration, how to use StoreOnce CLI commands
To Next Page
Loading...
