FUP Messages
File Utility Program (FUP) Reference Manual—523323-014
3-16
Effect. None.
Recovery. Informational message only; no corrective action is needed.
Cause. A syntax error occurred. FUP required a keyword but found nothing or
something other than a keyword.
Effect. The command fails.
Recovery. Retype the command, correcting the syntax error.
Cause. FUP required a number but found nothing or an alphabetic value. For
example, after the SET option PART, the partition number must be provided.
Effect. The command fails.
Recovery. Retry the command after including the required number.
Cause. FUP required a string specification but did not find one. For example, for key-
sequenced files, the PART specification must include the partial-key value, which is a
string.
Effect. The command fails.
Recovery. Retry the command after including the required string specification.
Cause. This is not an error. FUP was reading from a tape file (for example, COPY,
LOAD from tape), and no more records remained in the current reel, but there are
more reels to read.
Effect. FUP waits for the next reel to be mounted.
Recovery. Mount the next reel.
Cause. Some internal structures were found to be corrupted.
Effect. The command might not execute.
Recovery. This message should not appear. If it does, contact your service provider.
MISSING KEYWORD
MISSING NUMBER
MISSING STRING
MOUNT NEXT TAPE
MUST DUP PARTONLY IF 'NO PART[S]' SPECIFIED
MUST REARRANGE DATA AMONG PARTITIONS: PARTONLY DISALLOWED
To Next Page
Loading...
Need help?
General