FUP Messages
File Utility Program (FUP) Reference Manual—523323-014
3-24
Cause. An attempt was made to use the REELS parameter when in-file for the
operation was a TAPE DEFINE name with LABELS set to label processing.
Effect. The command fails.
Recovery. Use the REELS and VOLUME TAPE DEFINE attributes with multiple
labeled tapes.
Cause. A RELOAD command failed before completion.
Effect. The STATUS command terminates.
Recovery. For corrective action for the file-system error number indicated by nnn, see
the Guardian Procedure Errors and Messages Manual.
Cause. A RELOAD command was issued against filename while another RELOAD
command was already in progress for that file.
Effect. The command fails.
Recovery. Informational message only; no corrective action is needed.
Cause. A file-system error was encountered while attempting to rename the indicated
file.
Effect. The command fails.
Recovery. For corrective action for the file-system error number indicated by nnn, see
the Guardian Procedure Errors and Messages Manual.
Cause. FUP was expecting a delimiter but did not find it or an ANSI Name is entered
without specifying a required comma, open parenthesis, or closing parenthesis.
Effect. The command fails.
Recovery. Retry the command after adding the delimiter.
Cause. A RESTART operation was attempted, but the restart file did not have the
correct file code. The restart file was not created by FUP as part of a legitimate
RESTARTABLE DUP operation.
filename: RELOAD ABENDED WITH ERROR nnn
filename: RELOAD ALREADY IN PROGRESS
filename : RENAME ERR : nnn
REQUIRED DELIMITER MISSING
RESTART FILE MUST HAVE FILECODE 855
To Next Page
Loading...
