HP Z Series User Manual

4. Remove the front bezel (3).
To install the front bezel, reverse the removal procedure.
Dust filter
To remove the dust filter, use these procedures.
Before removing the dust filter, follow these steps:
1. Prepare the computer for disassembly (see Preparation for disassembly on page 18).
2. Remove the front bezel (see Front bezel on page 18).
Remove the dust filter:
1. Lift the top and bottom dust filters by the blue touchpoints to remove them from the bezel.
Dust filter
19

HP Z Series Specifications

General

Series	Z Series
Category	Desktop
Processor	Intel Xeon or Intel Core (depending on the specific model)
Operating System	Windows 10 Pro or Windows 11 Pro
Storage	SSD or HDD options, up to multiple TB
Graphics	NVIDIA Quadro or AMD Radeon Pro
Expansion Slots	Multiple PCIe slots
Ports	USB, DisplayPort, HDMI
Form Factor	Tower
Memory	Up to 256 GB DDR4 ECC or non-ECC SDRAM (depending on the specific model)
Power Supply	Various wattage options, typically 500W to 1000W (depending on the specific model)