HP Z Series User Manual

Using HP PC Hardware Diagnostics9
You can use the HP PC Hardware Diagnostics utility to determine whether your computer hardware
is running properly. The three versions are HP PC Hardware Diagnostics Windows, HP PC Hardware
Diagnostics UEFI (Unified Extensible Firmware Interface), and (for select products only) Remote HP PC
Hardware Diagnostics UEFI, a firmware feature.
Using HP PC Hardware Diagnostics Windows (select products
only)
HP PC Hardware Diagnostics Windows is a Windows-based utility that allows you to run diagnostic tests
to determine whether the computer hardware is functioning properly. The tool runs within the Windows
operating system to diagnose hardware failures.
If HP PC Hardware Diagnostics Windows is not installed on your computer, you must download and
install it. To download HP PC Hardware Diagnostics Windows, see Downloading HP PC Hardware
Diagnostics Windows on page 87.
Using an HP PC Hardware Diagnostics Windows hardware failure ID code
When HP PC Hardware Diagnostics Windows detects a failure that requires hardware replacement, a
24-digit failure ID code is generated for select component tests. For interactive tests, such as keyboard,
mouse, or audio and video palette, you must perform troubleshooting steps before you can receive a
failure ID.
■
You have several options after you receive a failure ID:
● Select Next to open the Event Automation Service (EAS) page, where you can log the case.
● Scan the QR code with your mobile device, which takes you to the EAS page, where you can log
the case.
● Select the box next to the 24-digit failure ID to copy your failure code and send it to support.
Accessing HP PC Hardware Diagnostics Windows
After HP PC Hardware Diagnostics Windows is installed, you can access it from the Start menu or HP
Support Assistant.
Accessing HP PC Hardware Diagnostics Windows from the Start menu
After HP PC Hardware Diagnostics Windows is installed, follow these steps to access it.
1. Select the Start button.
2. Right-click HP PC Hardware Diagnostics for Windows, select More, and then select Run as
administrator.
3. When the tool opens, select the type of diagnostic test that you want to run, and then follow the
on-screen instructions.
86
Chapter 9 Using HP PC Hardware Diagnostics

HP Z Series Specifications

General

Series	Z Series
Category	Desktop
Processor	Intel Xeon or Intel Core (depending on the specific model)
Operating System	Windows 10 Pro or Windows 11 Pro
Storage	SSD or HDD options, up to multiple TB
Graphics	NVIDIA Quadro or AMD Radeon Pro
Expansion Slots	Multiple PCIe slots
Ports	USB, DisplayPort, HDMI
Form Factor	Tower
Memory	Up to 256 GB DDR4 ECC or non-ECC SDRAM (depending on the specific model)
Power Supply	Various wattage options, typically 500W to 1000W (depending on the specific model)