Table 6-3 Computer Setup Advanced (for advanced users) (continued)
Option Heading
Boot Options (continued)
● UEFI Boot Order: Specify the order in which UEFI boot sources are checked for a bootable
operating system image. The default boot order is:
1. USB
2. SATA DVD
3. SATA hard drives
4. M.2 devices
5. Network boot
NOTE: Use the UP and DOWN arrows to highlight an item. Press enter to select. Use the UP and
DOWN arrows to move a selected item. Press f5 to enable or disable. Press esc to exit.
Shortcut to Temporarily Override Boot Order
To boot one time from a device other than the default device specified in Boot Order, restart the
computer and press esc (to access the Startup menu) and then f9 (Boot Menu), or only f9 (skipping
the Startup menu) when the power button light turns white. After POST is completed, a list of
bootable devices is displayed. Use the arrow keys to select the preferred bootable device and press
enter. The computer then boots from the selected non-default device for this one time.
HP Sure Recover HP Sure Recover
If enabled and HP Sure Recover is launched, the system firmware honors local and remote requests
to reinstall the operating system. If it is disabled, all requests to reinstall the operating system are
ignored. Default is enabled.
Recover from Network
Allows system firmware to retrieve the recovery agent from the network. If disabled, system
firmware retrieves the recovery agent from a local drive. Default is enabled.
Recover after Boot Failure
If enabled and no bootable UEFI operating system is found, system firmware launches HP Sure
Recover. Default is disabled.
Recover before Boot Failure Recovery
If enabled and HP Sure Recover is launched because of a boot failure, the user is notified of the boot
failure and asked to choose whether to start or cancel HP Sure Recover. This setting is displayed
only if
Recover after Boot Failure is selected.
Recovery Agent
Displays recovery agent information. This information is displayed only if Recover from Network is
selected.
Recovery Image
Displays recovery image information. This information is displayed only if Recover from Network is
selected.
OS Recovery Image Version.
Display the version of the recovery image stored in the embedded secure storage device. This
information is displayed only if an embedded secure storage device is installed.
OS Recovery Driver Version
Display the version of the recovery driver stored in the embedded secure storage device. This
information is displayed only if an embedded secure storage device is installed.
Computer Setup Advanced
67
To Next Page
Loading...
Need help?
General
