Removal and replacement procedures 109
b. Check the inside of the bracket for the bracket’s name to match the correct bracket.
7. Install the OCP mezzanine card bracket.
8. Install the OCP mezzanine card into the system:
a. Insert the OCP mezzanine card into the slot at the rear of the system.
CAUTION: When inserting the MCX4421 and MCX4431 OCP mezzanine cards, users will
need to press and squeeze the foam at the rear of the card to fit the card into the slots along the
rear wall of the chassis. Failure to press the foam may result in damage to the card’s mylar
sheath.
To Next Page
Loading...
