HPE Cloudline CL2200 Gen10

Removal and replacement procedures 75
DIMM identification
To determine DIMM characteristics, see the label attached to the DIMM and refer to the following
illustration and table.
Item
Description
Definition
1
Capacity
16 GB
32 GB
64 GB
2
Rank
1R = Single-rank
2R = Dual-rank
4R = Quad-rank
3
Data width on DRAM
x4 = 4-bit
x8 = 8-bit
4
Memory generation
PC4 (DDR4)
5
Maximum memory speed
2666 MT/s
6
CAS latency
V=9
7
DIMM type
R = RDIMM (registered)
L = LRDIMM (load reduced)
8
SPD Revision
11
For more information about product features, specifications, options, configurations, and compatibility,
see the product QuickSpecs on the Hewlett Packard Enterprise website (http://www.hpe.com/info/qs).
 For DIMM spare replacement, install the DIMMs per slot number as instructed by the system
software.
For more information about server memory, see the Hewlett Packard Enterprise website
(http://www.hpe.com/info/memory).