HPE Cloudline CL2200 Gen10

System utilities 53
Boot menu
Parameter
Description
Value
Boot Configuration
Setup Prompt Timeout
Set the number of seconds to wait for setup activation key.
1 ~ 65535
Bootup NumLock State
Select to enable or disable the Num-Lock key during boot.
On
Off
Quiet Boot
When enabled, BIOS will show a full screen logo when
booting; if disabled, BIOS will show the diagnostic POST
screen when booting.
Enabled
Disabled
Boot mode select
Selects the boot mode
Legacy
UEFI
Fixed Boot Order Priorities
Boot Option #1
Boot Option #2
Boot Option #3
Boot Option #4
Boot Option #5
Displays the device assigned to the specified boot sequence. The
Setup Utility attempts to boot the operating system in this order. By
default, the server searches for boot devices in the following order:
Storage Device (HDD/SSD/NVMe)
Optical Drive (CD/DVD)
USB Device
Network Boot (LAN)
UEFI AP
UEFI Network Drive BBS Priorities
Configure UEFI network drive boot priorities
UEFI Application Boot Priorities
Configure UEFI application boot priorities