HPE Cloudline CL2200 Gen10 User Manual

Specifications 144
Specifications
Environmental specifications
Specification
Value
Temperature range*
Operating
10C to 35C (50F to 95F)
Non-Operating
-30C to 60C (-22F to 140F)
Relative humidity (non-condensing)**
Operating
8% to 90%
Non-operating
5% to 95%
* All temperature ratings shown are for sea level. An altitude derating of 1°C per 305 m (1.8°F per 1,000 ft) to 3,050 m
(10,000 ft) is applicable. No direct sunlight allowed. Maximum rate of change is 20°C/hr (36°F/hr). The upper limit and
rate of change might be limited by the type and number of options installed.
** Storage maximum humidity of 95% is based on a maximum temperature of 38.7°C (101.7°F). Altitude maximum for
storage corresponds to a pressure minimum of 70 KPa.
*** Maximum allowable altitude change rate is 305 m/min (1,000 ft/min).
NOTE: The upper operating temperature limit and rate of change may be limited by the type and number of
options installed.
Maximum operating altitude may be limited by the type and number of options installed.
Server specifications
Specification
Value
Height
87.50 mm (3.44 in)
Depth
730.00 mm (28.74 in)
Width
438.00 mm (17.24 in)
Weight
Maximum*
SFF: 29.90 kg (65.91 lbs)
LFF: 33.98 kg (74.91 lbs)
Minimum**
SFF: 20.87 kg (46.01 lbs)
LFF: 20.87 kg (46.01 lbs)
* With all hard drives, power supplies, and processors installed.
** With 1 hard drive, 1 power supply and 1 processor installed.

HPE Cloudline CL2200 Gen10 Specifications

General

Brand	HPE
Model	Cloudline CL2200 Gen10
Category	Server
Language	English