HPE Cloudline CL2200 Gen10

Spare parts catalog 58
Item
Description
Spare part
number
Customer self repair
 Slimline SAS 800mm, CL2200 Gen10 LFF
Mandatory
1
(on page126)
 Slimline SAS 800mm, CL2200 Gen10 SFF
Mandatory
1
(on page 126)
 Slimline SAS 600mm, CL2xxx Gen10
Mandatory
1
(on page126)
Miscellaneous Parts*
--
--
a) Hard Drive Trays
P02134-001
--
 2.5 blue HDD Tray, CL2xxx Gen10
Mandatory
1
(on page 64)
 2.5 orange HDD Tray, CL2xxx Gen10
Mandatory
1
(on page 64)
 SCR, HDD Tray
Mandatory
1
(on page 64 and 66)
 3.5 HDD Tray, CL2xxx Gen10
Mandatory
1
(on page 66)
 SCR, System, CL2200 Gen10
Mandatory
1
(on page 83)
Enablement Parts*
--
--
a) NVMe Enablement FIO Kit
--
--
 PCA NVMe-CNVO124 OCP CL2200
P02176-001
Mandatory
1
(on page 120)
 SPS-PCA NVMe ByPass-CEPM080 CL2200
P02177-001
Mandatory
1
(on page 120)
 Cable Kit:PWR/Slimline NVMe CL2200**
P02178-001
Mandatory
1
(on page 120)
b) SAS Exp enablement FIO Kit
--
--
 PCA Expander to BP (SAS Exp) CL2200
P02179-001
Mandatory
1
(on page 113)
 Cable Kit:PWR/Slimline SAS CL2200**
P02180-001
Mandatory
1
(on page 113)
c) M.2 Enablement
P02966-001
Mandatory
1
(on page 117)
d) Trusted Platform Module 2.0
P02967-001
Mandatory
1
(on page 82)
* Not shown
** See Cabling section
1
Mandatory—Parts for which customer self repair is mandatory. If you request Hewlett Packard Enterprise to replace
these parts, you will be charged for the travel and labor costs of this service.
2
Optional—Parts for which customer self repair is optional. These parts are also designed for customer self repair. If,
however, you require that Hewlett Packard Enterprise replace them for you, there may or may not be additional
charges, depending on the type of warranty service designated for your product.
3
No—Some Hewlett Packard Enterprise parts are not designed for customer self repair. In order to satisfy the
customer warranty, Hewlett Packard Enterprise requires that an authorized service provider replace the part. These
parts are identified as "No" in the Illustrated Parts Catalog.
4
To get the System Board spare number:
o Locally:
Command: ipmitool fru print