HPE OfficeConnect 1950 Series

17
QoS menu
Use Table 6 to navigate to the tasks you can perform from the QoS menu.
Table 6 QoS menu navigator
Menus
Tasks
QoS
QoS Policies
• Create, modify, or delete interface QoS policies.
• Create, modify, or delete VLAN QoS policies.
• Create, modify, or delete global QoS policies.
Hardware Queuing Modify hardware queuing configuration.
Priority Mapping
• Configure the port priority.
• Configure the priority trust mode for a port.
• Configure priority maps:
{ Apply and reset the 802.1p-to-local priority map.
{ Apply and reset the DSCP-to-802.1p priority map.
{ Apply and reset the DSCP-to-DSCP priority map.
Rate Limit Create, modify, or delete rate limit.
Security menu
Use Table 7 to navigate to the tasks you can perform from the Security menu.
Table 7 Security menu navigator
Menus Tasks
Packet Filter
Packet Filter
• Create, modify, or delete a packet filter for an interface, a VLAN, or the
system.
• Configure the default action for the packet filter.
IP Source Guard Configure an interface-specific static IPv4 source guard binding.
Access Control
802.1X
• Enable or disable 802.1X.
• Configure the 802.1X authentication method.
• Configure the port access control method.
• Configure the port authorization state.
• Configure the authentication ISP domain on a port.
MAC Authentication
• Enable or disable MAC authentication.
• Configure the username format.
• Configure the MAC authentication ISP domain.
Port Security
• Enable or disable port security
• Configure the port security mode.
• Configure the intrusion protection action.
• Configure the NTK mode.
• Configure secure MAC aging mode.