16
Menus Tasks
Telnet
• Enable or disable Telnet service.
• Set the DSCP values for the device to use for outgoing IPv4 or IPv6
Telnet packets.
• Specify Telnet access control ACLs.
NTP Configure the device to use the local clock as the reference clock.
SNMP
• Enable SNMP.
• Configure SNMP parameters such as version, community name, group,
and users.
• Configure the notification sending function.
Resources menu
The Resources menu contains common resources that can be used by multiple features. For
example, you can use an ACL both in a packet filter to filter traffic and in a QoS policy to match traffic.
Use Table 5 to navigate to the tasks you
can perform from the Resources menu.
Table 5 Resources menu navigator
Menus Tasks
ACLs
IPv4
• Create, modify, or delete an IPv4 basic ACL.
• Create, modify, or delete an IPv4 advanced ACL.
IPv6
• Create, modify, or delete an IPv6 basic ACL.
• Create, modify, or delete an IPv6 advanced ACL.
Ethernet Create, modify, or delete an Ethernet frame header ACL.
Time Range
Time Range
SSL
SSL
• Create, modify, or delete an SSL client policy.
• Create, modify, or delete an SSL server policy.
Public key
Public key
• Manage local asymmetric key pairs.
• Manage peer host public keys.
PKI
PKI
• Manage CA and local certificates.
• Create, modify, or delete a PKI domain or PKI entity.
Certificate Access Control
• Create, modify, or delete a certificate access control policy.
• Create, modify, or delete a certificate attribute group.
NOTE:
You can create ACLs from ACL pages or during the process of configuring a feature that uses ACLs.
However, to modify or delete an ACL, you must access the ACL menu.
To Next Page
Loading...
