HPE OfficeConnect 1950 Series User Manual

1
Overview
This user guide provides the following information:
Information Section
How to log in to the Web interface for the first time. Logging in to the Web interface for the first time
How to use the Web interface. Using the Web interface
What features you can configure from the Web
interface.
How to access the page for a feature or task.
Feature navigator
How to use features in typical scenarios. Configuration examples
How to manage the device from the CLI. Appendix A Managing the device from the CLI
This user guide does not include step-by-step configuration procedures, because the webpages are
task oriented by design. A configuration page typically provides links to any pages that are required
to complete the task. Users do not have to navigate to multiple pages. For tasks that require
navigation to multiple pages, this user guide provides configuration examples.
This user guide also does not provide detailed information about parameters. You can obtain
sufficient online help, feature information, and parameter information from the webpages.

HPE OfficeConnect 1950 Series Specifications

General

Model	HPE OfficeConnect 1950 Series
Switch Type	Managed
Layer	Layer 2/3
Switching Capacity	Up to 176 Gbps
MAC Address Table Size	16, 000 entries
Routing Protocol	Static, RIP, OSPF
Operating Temperature	0°C to 45°C
QoS Support	Yes
Ports	24 or 48 Gigabit Ethernet ports
10G Ports	Optional 2 or 4 SFP+ ports
PoE Support	Yes
Stacking	Yes (up to 4 switches)
Management	Web-based, SNMP, CLI
Security	802.1X, ACLs, Port Security
Forwarding Rate	Up to 131 Mpps
Power Supply	Internal
Dimensions	Varies by model
Weight	Varies by model
Operating Humidity	10% to 90% non-condensing