b. Install the power supply in bay 2.
14.
If removed, install one of the following items:
• Secondary riser cage blank
• Secondary riser cage
•
Rear 2-bay SFF SAS/SATA drive cage
15.
Install the air bale.
16.
Install the access panel.
17. Install the server into the rack.
18. Connect all peripheral cables to the server.
19. Connect each power cord to the server.
20. Connect each power cord to the power source.
21.
Power up the server.
22. If removed, install the front bezel.
The installation is complete.
Hardware options installation
102
To Next Page
Loading...
