HPE ProLiant DL360 Gen11

11. Install the server in the rack.
12. Connect each power cord to the server.
13. Connect each power cord to the power source.
14. Power up the server .
SecuritySecurity
SubtopicsSubtopics
Installing the bezelInstalling the bezel
Installing the Chassis Intrusion Detection switch optionInstalling the Chassis Intrusion Detection switch option
Trusted Platform Module 2.0 guidelinesTrusted Platform Module 2.0 guidelines
Installing the bezelInstalling the bezel
ProcedureProcedure
1. Install the bezel.
2. Using a Kensington security lock, lock the bezel.
HPE ProLiant DL360 Gen11 Server User Guide 104