8. Lift the heatsink away from the system board.
9. Place the heatsink on a flat work surface with its contact side facing upward.
10. Use an alcohol wipe to remove the existing thermal grease from the processor.
Allow the alcohol to evaporate before continuing.
11. Remove the thermal interface protective cover from the new heatsink.
CAUTION:CAUTION:
To prevent mechanical damage or depositing oil on your hands or other contaminant to the heatsink contact surface,
hold the heatsink only by the edge of its base plate. Do not touch the heatsink fins.
12. Position the heatsink on top of the processor. Ensure that it is properly seated before securing the screws.
To Next Page
Loading...
