ItemItem LEDLED StatusStatus DefinitionDefinition
1 Fault or Locate Solid amber This drive has failed, is unsupported, or is invalid.
Solid blue A management application has identified the drive and the drive is
operating normally.
Flashing amber or blue
(1 flash per second)
The drive has failed, or a predictive failure alert has been received
for this drive. A management application has also identified the
drive.
Flashing amber (1 flash
per second)
A predictive failure alert has been received for this drive. Replace
the drive as soon as possible.
Off The drive is operating normally.
2 Online or Activity Solid green The drive is online and not active.
Flashing green (1 flash
per second)
The drive is doing one of the following:
Rebuilding or performing a RAID
Performing a stripe size migration
Performing a capacity expansion
Performing a logical drive extension
Erasing
Activating a replacement drive
Flashing green (4
flashes per second)
The drive is operating normally.
Off The drive is not configured or is a spare drive.
EDSFF SSD LED definitionsEDSFF SSD LED definitions
The server supports hot-plug Enterprise and Data Center Standard Form Factor (EDSFF) NVMe SSDs in the E3.S form factor .The E3.S drive
carrier has two LEDs:
Amber/blue LED—Managed by the drive backplane in conjunction with the storage controller and is used to indicate drive status.
Green LED—Managed by the drive itself and indicates the drive activity.
To Next Page
Loading...
