To remove blanks from the secondary riser:
a. Lift the latch.
b. Remove the screw securing the PCIe blank.
c. Remove the PCIe blank.
ResultsResults
To replace the component, reverse the removal procedure.
Removing and replacing a riser cageRemoving and replacing a riser cage
ProcedureProcedure
1. Power down the server.
2. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
3. Do one of the following:
a. Extend the server from the rack .
b. Remove the server from the rack .
To Next Page
Loading...
