HPE ProLiant DL365 Gen11 - Results; Removing and replacing the enclosure rails

4. Remove the cable management arm:
a. Press and hold the blue PUSHPUSH button on the retention bracket (callout 1).
b. Swing the arm away from the mounting rail (callout 2).
c. Press and hold the blue PUSHPUSH buttons on the outer and inner tabs and detach from the enclosure rails (callouts 3 and 4).
ResultsResults
To replace the component, reverse the removal procedure.
Removing and replacing the Removing and replacing the enclosureenclosure rails rails
HPE ProLiant DL365 Gen11 Server Maintenance and Service Guide 39