This retention frame is spring-loaded. Once the screw is loosened enough, hold the retention frame as it automatically pivots to a
vertical position (callout 2) .
b. Hold the lift tabs and pivot the rail frame to the vertical position (callout 1).
c. Slide the processor out of the rail frame (callout 2).
CAUTION:CAUTION: The pins on the processor socket and on the processor are very fragile and easily damagedThe pins on the processor socket and on the processor are very fragile and easily damaged . To avoid
component damage, do not touch these pinsdo not touch these pins. Any damage to them might require replacing the system board and/or
processor.
12. Do not touch the pin field on the socket and the processor contacts.
To Next Page
Loading...
