SubtopicsSubtopics
Using SSAUsing SSA
Using SSAUsing SSA
SSA provides high-availability configuration, management, and diagnostic capabilities for all Smart Array products.
SubtopicsSubtopics
SSA featuresSSA features
Accessing SSAAccessing SSA
DiagnoseDiagnose
SSA featuresSSA features
SSA is a browser-based utility that runs in either offline or online mode. SSA:
Supports online array capacity expansion, logical drive extension, assignment of online spares, and RAID or stripe size migration.
Suggests the optimum configuration for an unconfigured system.
Provides different operating modes, enabling faster configuration or greater control over the configuration options.
Displays on-screen tips for individual steps of a configuration procedure.
In SSA, you can select a controller from the menu at the top left-hand side of the screen, or you can choose to configure or diagnose an
available controller from the same menu.
Accessing SSAAccessing SSA
About this taskAbout this task
SSA can be launched from F10SSA can be launched from F10
Press F10 and Select SR Storage Administrator from the menu.
The Smart Storage Administrator window is displayed.
Launching SSA from Intelligent Provisioning Home ScreenLaunching SSA from Intelligent Provisioning Home Screen
1. On the Intelligent Provisioning home screen, click Perform Maintenance
2. Select SR Storage Administrator from the maintenance options.
The Smart Storage Administrator window is displayed.
SubtopicsSubtopics
ConfigurationConfiguration
ConfigurationConfiguration
To Next Page
Loading...
