, and the user will not be able to proceed.
For Windows installations, messages about an untested Windows version and hpkeyclick messages might be displayed while the drivers
are installed. This is expected behavior. No action is required.
About RAID arraysAbout RAID arrays
RAID arrays can help increase system performance and reduce the risk of drive failure. You can create RAID arrays with drives with different
specifications, but performance will be based on the smallest drive or lowest speed. For example, if you create an array with a 1 TB drive and
a 2 TB drive, then the array can store a maximum 1 TB of data. The extra storage on the larger drive is not available until you reformat the
drive.
SubtopicsSubtopics
RAID 0RAID 0
RAID 1 and RAID 1+0 (RAID 10)RAID 1 and RAID 1+0 (RAID 10)
RAID 5RAID 5
RAID 50RAID 50
RAID 6RAID 6
RAID 60RAID 60
Dedicated spareDedicated spare
Failure spare activationFailure spare activation
RAID 0RAID 0
A RAID 0 configuration provides data striping, but there is no protection against data loss when a drive fails. However, it is useful for rapid
storage of large amounts of noncritical data (for printing or image editing, for example) or when cost is the most important consideration.
The minimum number of drives required is one.
find any supported disk installed on this system
To Next Page
Loading...
